News Center
16
2024
-
04
Fuel Saving Skills of Pastoral Management Machine
The pastoral management machine is currently a very popular pastoral operation machine. The work efficiency is very high, and the cost of the equipment is relatively low. However, the rate of work brings about the consumption of oil and increases the cost of use. Then the following small series Give everyone the fuel-saving skills of the pastoral management machine:
The first is not to overload the work, excess load will lead to the power of the equipment to increase, thereby increasing the consumption of oil.
There is also the need to avoid idling. Therefore, the editor here reminds everyone that before using the pastoral management machine, you must first have a simple understanding of the pastoral terrain and the road of operation, and have a work plan to reduce the idling time. Can reduce the fuel consumption of the equipment.
Another is to control the temperature of the engine. If the temperature is too high, it will prove that the running time is too long. However, if the temperature of the engine is too high, do not use cold water for physical cooling. You can stop the engine for a while to cool it down naturally.
Then it is necessary to clean and maintain the oil supply system, and use oil with less impurities. If there are too many impurities, it will block the parts of the oil supply system and increase the degree of wear.
Therefore, this requires us to regularly clean the dust and grime inside the machine in daily use, and regularly check whether the parts of the machine are normal to avoid failure. I hope that the fuel-saving skills of the above pastoral management machine can help everyone.
In order to use the ditching machine safely, we must abide by the rules of use and do a good job of debugging before starting each time. What problems should we pay attention to before using the ditching machine?
1. After the repurchasing of the newly opened ditch earthmoving machine, the residual oil in the engine and variable speed shall be cleaned first. The residual oil is the oil used for debugging products in the factory. The oil is reusable oil, which is very unclean and contains a large amount of moisture, sediment, iron filings and other sundries. Long-term use will cause rapid damage to the equipment of the ditch earthmoving machine and even pull the cylinder.
2. Before starting the engine of the ditching and bulldozer, you must push back and forth in the open space, master the skills of gear shifting and clutching, and be especially familiar with the function and function of the clutch. The role of the clutch is the same as that of a high-speed automobile clutch, which plays an important role.
3. In case of emergency, first activate the clutch, cut off the power supply, and then deal with related problems. Many accidents with casualties are when the machine is not working normally, the clutch is not cut off, and the power continues to be supplied, resulting in casualties that should not occur.
Therefore, in order for everyone to use, but also to check whether the fastening parts are loose, the relevant parts have no cracks; after use, should remove weeds, dirt and other dirt, wipe clean, pay attention to rust. It is also necessary to do regular maintenance and maintenance to ensure the normal operation of the equipment.
Related News
Contact Information
Address: Da Changyuan Village, Sangyuan Town, Ju County, Rizhao City, Shandong Province
嘉恒智能
SAF Coolest v1.3.1.2 设置面板 YNWSD-ZXVN-PXSVE-XVZ
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page