News Center
16
2024
-
04
5 steps can be a good maintenance ditching bulldozer
Ditching and ditching in the whole process of use, prone to minor faults is a common phenomenon, which also requires us to carry out timely maintenance, but before maintenance to do a good job, the disassembly process should be carried out in accordance with the relevant specifications, before the operation, we first understand these five steps.
1. Maintain the cleanliness of the mechanical use site and the machine: The working environment of the ditching and ditching machine is characterized by a lot of soil, so when the machine fails, a clean site should be selected, the machine should be cleaned and then repaired, otherwise, a small component may be lost.
2. Preparation and selection of tools: Ditching and ditching machines should be disassembled and assembled with special tools in many places, otherwise the parts will be easily damaged and cannot be disassembled and assembled by force. So we need to prepare the relevant equipment.
3. Disassembly principle: first assemble the parts and then place them in order. Pay attention to the problem of mark, gap, direction and screw homing. If necessary, mark with pen or record relevant data.
4. Analyze the cause of the failure: All failures will have specific causes, find out the causes, cure the root cause, and cure both the symptoms and the root causes. Otherwise, it may cause greater losses.
5. Assembly: Clean all ditching and ditching machine accessories and assemble them in the reverse order of disassembly.
Related News
Contact Information
Address: Da Changyuan Village, Sangyuan Town, Ju County, Rizhao City, Shandong Province
嘉恒智能
SAF Coolest v1.3.1.2 设置面板 YNWSD-ZXVN-PXSVE-XVZ
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page