News Center
16
2024
-
04
When the ditching and ditching machine is working on hard ground......
As we all know, ditching and ditching is an agricultural machinery product specially designed for the operation process in orchards, vegetable fields, greenhouses, paddy fields, dry fields and other places. It can be 360 ° free rotation, can be in the field to control the direction, the operation process is simple. The machine adopts the method of casting the gearbox as a whole to make it sturdy "please climb another high-rise building". The performance of the dry friction clutch is also very reliable. Therefore, the ditching and ditching machine is also a good helper for farmers. But it still has a lot of places for the operator is not too understanding, in the face of hard land, but also how to use it to achieve the operation process?
When geologically hard ground is encountered, the relevant rotating blades can be equipped for loosening operations. Because the ditching machine is equipped with tools, for the land, is relatively sharp. And because of the power intensity of the current equipment, the machinery will have a very high operating efficiency support when using the rotary knife for operation. Even if you encounter stones, it will be easily chopped, will not cause problems such as blocking. In the use of rotary knife operation, try to avoid the use of hands operation, to avoid injury to the body.
The gearbox is used to change the unit derived from the engine speed and torque, and can change the transmission ratio of the output shaft and the input shaft in a fixed and stepwise manner. It is composed of a variable speed transmission mechanism and a control mechanism. Most of the transmission mechanisms are ordinary gear transmission, and planetary gear transmission is also used. The ordinary gear transmission mechanism usually uses sliding gears, synchronizers, etc.
The gearbox is a very important part of the mechanical use process. Each gearbox has its own advantages, and of course there are also shortcomings. This requires the use of a suitable gearbox.
One: Fixed type: This is a kind of gearbox that is relatively widely used in traditional machinery. The speed is the same. It tends to be a speed from the beginning to the end. There is no need to change gears. If you encounter very large resistance, you will crash. This is also a phenomenon of suffocation, so when using a traditional fixed gearbox, you should pay attention to the advantages and disadvantages.
Two: Variable speed: Variable speed gearbox is a type that can change the speed into various gears. When running at low speed, the power is very strong. When running at high speed, the rotation speed is increased and the power is relatively small. Therefore, its advantages are also very obvious: when the resistance is large, the low gear is used, and when the resistance is small, the high gear is used.
Related News
Contact Information
Address: Da Changyuan Village, Sangyuan Town, Ju County, Rizhao City, Shandong Province
嘉恒智能
SAF Coolest v1.3.1.2 设置面板 YNWSD-ZXVN-PXSVE-XVZ
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page